Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

I make my Frigidaire FRS24WSCB1 start running by opening the freezer door


Virtual

Recommended Posts

It runs (or doesn't run) intermittently for days at a time.  It has run fine for as long as a week.  One time when we were away, it apparently never came on for 3 days.  When stopped, it typically will start running when the freezer door is opened!  Honestly.  I just now started it again by jerking the door open.  When it is running, I think opening the freezer door will also sometimes stop it, although I'm not sure about this. 

I replaced the defrost thermostat about 10 months ago – the original one was grounding out on the defrost heater coil.  The fridge worked fine for about 9 months, until this new problem came.

I put in a new defrost timer 10 months ago, too.  (This turned out not to be the problem then.)  I tried putting the original timer back in, and I get the same intermittent / freezer door behavior.

The ice maker system has been taken out. 

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Hiroshi

    2

  • Virtual

    2

Top Posters In This Topic

Thanks for the reply.  Seems like this controller has to have gone bad, so I ordered one.  Just now, the fridge stopped running when I opened the freezer door.  After a few minutes, I re-started it by banging on the controller knob with my hand.  Yesterday, I checked the wiring clips on it; they're on solidly, so the problem must be in the control unit.     

Link to comment
Share on other sites

Yes, the contacts inside start to fail... if the old Arthur Fonzarelli punch starts the machine, it is usually the cold control.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...