Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

miele w1070 washer prob


xrjoe

Recommended Posts

newbie here looking for guidance, I love this vintage washer, when it goes through normal pre-wash, it cycles and drains advancing timer to main wash, then freezes, im checking fill valve for current, none to be had, I tried slightly advancing timer, but don't get further activity till the later rinse cycle. just to further identify activity, I ran a delicate cycle cold, to see if main wash would progress, and it has the same "freeze" with no fill, activity. so my question to this forum, can these timers be disassembled to restore contacts? seems like a water fill load on the timer contacts would be minimal compared to a pump, but im just getting into this.

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • xrjoe

    3

  • VikingDaniel

    2

Top Posters In This Topic

VikingDaniel

No the contact cannot be replaced in the timer, if it is in fact a bad timer. Here is the part number for that timer, 

Product code:  02085001
Description:

TIMER


Just to note, a timer advances when circuits are completed. If a sensor, or thermostat are not closing, then the timer will sit there waiting for the next voltage to advance.

Since the timer is over $500 just for the part, you may want to call someone who can diagnose it fully.

Link to comment
Share on other sites

the mainwash fill is what failed, ill be looking to source that part. thx.

Link to comment
Share on other sites

VikingDaniel

1-800-999-1360 is Miele tech line, they can do basic troubleshooting with you and you can order the part from them directly.


Dan

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...