Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Linear compressor issues


Stronghammer

Recommended Posts

I have a LG LFX25976ST/00 and the new compressor (with new inverter board) ran for about 15 min or so just fine. Then the led light on the inverter board started flashing 3 times. At this point the suction pressure went up to about 20-30 PSI. I reset the unit. (unplugged till light cleared) and it would run without a blinking light but with the higher suction pressure. When i pushed the button to but it into test mode it would pull down for a couple minutes and then start blinking 3 times on the inverter board. I have the service manual but it only shows what codes are for 2,4,5,6,7 blinks. And yes I have made sure it is 3 times not 6. When it is in test mode the voltage to the compressor ramps up to about 300. when it is running but the suction pressure is high, the voltage is in the low 200's. It is the TCA36411701 compressor with the ABQ73004304 inverter board. 

I am very confused about what is going on. Any suggestion would be appreciated. 

Link to comment
Share on other sites

  • 1 year later...
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • Richard Demint

    1

  • Wayne Moore

    1

  • Stronghammer

    1

Sure wish someone would have answered this one. I’m having same issue. 

Link to comment
Share on other sites

  • 3 weeks later...
Richard Demint

Last one I worked on like this with a three blink was a connect error code I believe, check capacitor harness

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...