Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Leaky VRT Samsung WF395BTPAWR/A1 washer


alexeinspruch

Recommended Posts

alexeinspruch

WF395BTPAWR/A1  from Sam song is about four years old maybe three and suddenly began leaking a small puddle of water underneath which I attempted to stop. Seen the logical place to start would be the drain so I replaced it then I checked the soap / softener basin fill tray drain hose I thought was drippping inside the machine and  made certain the hose clamps were secure.   I have a replacement for above hose ready but I tested the unit and it still leaks.  Going back over everything it seems to leak only from the left side which is where the pump and filter are, so my thought is perhaps the fill hose which is gray and double check the other two houses that are black behind the pump/filter unit.

 Would it be a longshot think the door seal has finally given out?  I've examined it thoroughly and found scanned evidence save one tiny area where it looks like water collected. 

 

 Like to fix this myself but it's getting old quick.....

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • alexeinspruch

    2

Popular Days

Top Posters In This Topic

alexeinspruch

I jacked up the unit and used the porthole in the bottom to look for active drips  while cycle is running -- dead center dripping from the inside of the door seal. That's the culprit. Looks like I have a backup washer pump now too.....

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...