Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Help wanted on electrolux induction range EW30IS65JSA


jplloyd

Recommended Posts

Oh great wise ones, 

I'm looking for some help on my electrolux induction range (7 year old model EW30IS65JSA ).  A few days ago the burners stopped working with error code E35/E75 AC input voltage too low (first one, then the other), so I followed the service manual instructions and replaced the filter circuit board(p/n 318347000), which had an obvious failure on the board.  Unfortunately (and $600 later) that board went pop when I installed it and tried it out. 
 

I now realize that the original issue with the filter board was that hard-wired fuse on the board had blown, so probably should have expected that was what would happen.  So now I figure I need to replace at least the generator circuit board (318347102), possibly more.  New ones seem to be expensive and/or not in stock, but I can get a used generator board on ebay for $175, or even a whole assembly of the induction boards with two generator boards and filter board new in box for $500.

Currently, it shows E31 (Internal generator error, sync Induction Housing Assembly / Left side cooking zones. ), although it was the right side unit that I powered up when the filter board went pop.

Any advice welcome.  The main thing I am wondering is whether I should replace any burner units, or whether the problem is likely to be contained just to the generator boards, and whether I should replace both generator boards, or try and get away with just one?

Best,

James

Link to comment
Share on other sites

  • Replies 0
  • Created
  • Last Reply

Top Posters In This Topic

  • jplloyd

    1

Popular Days

Top Posters In This Topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...