Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Job Aid and Tech Sheet Request

16345Ed

By 16345Ed
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

16345Ed Sensei

16345Ed

Posted
Posted
Manufacturer: Maytag
Type of Appliance: Laundry Center
Model Number: MET3800TW1
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

From images on Sears PD this unit has the controls all up over top of dryer door. 

Ive never worked on one before, I'd like to know how to troubleshoot and disassemble. 

Thanks

Ed

Link to comment
Share on other sites
  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • 16345Ed

    4

  • Lighthouse

    2

  • Hiroshi

    1

Popular Days

Top Posters In This Topic

Popular Days

Lighthouse Sensei

Lighthouse

Posted
Posted (edited)

Tech Sheet in downloads. No Job Aid on Service Matters.

I think I worked on one of these (old age memory sucks) and it wasn't too bad. Easier than the GE laundry center.

Edited by Lighthouse
add info
Link to comment
Share on other sites
16345Ed Sensei

16345Ed

Posted
  • Author
Posted (edited)

Thanks! yeah found that one figured it may be close enough but since I don't know how to take it apart thought I may as well as for TS with the Job Aid. 

No better way to make a new customer nervous then fumbling trying to take their unit apart. ☹️

Edited by 16345Ed
Link to comment
Share on other sites
Lighthouse Sensei

Lighthouse

Posted
Posted

That is the TS that came up for it on service matters.

14 minutes ago, 16345Ed said:

No better way to make a new customer nervous then fumbling trying to take their unit apart. ☹️

Maybe they will be one of those that leaves you alone.

Link to comment
Share on other sites
16345Ed Sensei

16345Ed

Posted
  • Author
Posted (edited)

It's not very different than the units with the control below dryer. 

Three screws hold face place that covers area between washer and dryer. Then washer comes apart like normal with the big spring clips. And washer tub frame on same slides as other laundry centers.  

Control panel has screws on top to remove it then you can remove dryer front. 

Edited by 16345Ed
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...