Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore Washer SERVICE MANUAL REQUEST


samedayapprepair

Recommended Posts

Manufacturer: KENMORE
Type of Appliance: WASHER
Model Number: 41741100000
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): YES
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): YES

Hello,

I am working on a front load Kenmore Elite washer Mod# 41741100000 Ser # 4C41404838. The problem with this unit is the machine does not turn off itself, have to turn off water supply manually. Unit does not drain water as well. Has anybody come across this problem, i am open for suggestions and solutions.

Thank you!

Link to comment
Share on other sites

Sorta sounds like a pressure switch failure or a hole in your pressure tube- if the unit cannot measure a full tub it will keep filling until the switch is satisfied, and if it has no water level registering it will not run the pump on an empty drum...

Here is the Frigidaire cross pending approval... 

 

 

Link to comment
Share on other sites

  • Team Samurai
1 hour ago, Hiroshi said:

Here is the Frigidaire cross pending approval... 

That file was already in the Downloads section so I replaced your upload with that. But domo for identifying the correct manual! 

Link to comment
Share on other sites

  • 2 years later...
  • Team Samurai
2 hours ago, MVrepairs said:

That is a dryer manual.

You're right, MVrepairs! I replaced the link with one pointing to the correct tech sheet for this model. Thanks for pointing that out!

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...