Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool Duet Washer W10441096A- the sound of silence


skissman

Recommended Posts

New to me washer, all the bells and whistles.  Except it doesn't.  No chimes are evident- even at the end of the cycle.  I've pressed the "cycle signal" button.  No change.  Not a big deal but I would like to know when the washer is done.

 

Thank you gurus!

 

Susan K

Link to comment
Share on other sites

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • skissman

    3

  • Hiroshi

    3

  • sh2sh2

    1

Popular Days

Top Posters In This Topic

The vast majority of control boards out there have a small speaker mounted on the circuit board, ocassionally, the solder joint on the part gives way and the result is SILENCE.

www.youtube.com/watch?v=-G16BPb2PKw

It is really not worth the trouble for this one detail, considering the board costs 200 dollars- buy a 99 cent egg timer from the dollar store and crank it to 60 minutes before you walk away from the laundry...

Link to comment
Share on other sites

Just now, sh2sh2 said:

Hold the cycle signal button for 5 seconds, see if that changes anything

And yes, reading the manual for the Tone adjustment instructions never hurts...!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...