Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

No ice maker water supply from Inlet valve FGHS2634KE0


Vqtory

Recommended Posts

I have no water supply from water inlet valve to icemaker due to no power at ice maker solenoid.  Water inlet valve itself was replaced.  Ice maker electrical connector to inlet valve and water supply connector to inlet valve were temporarily swapped to test new inlet valve itself. Valve works-supplies water to ice maker.

I'm looking for schematics on the water inlet valve and ice maker. I suspect an ice maker mold temperature sensor failure (which means I replace the complete ice maker assembly) But I'd like to verify instead of throwing parts at it. 

Professional advise or electrical diagrams are appreciated.

Link to comment
Share on other sites

  • Replies 7
  • Created
  • Last Reply

Top Posters In This Topic

  • Vqtory

    5

  • AccApp

    3

Top Posters In This Topic

Thanks for your reply. I wasn't sure of the procedure but YouTube is a pretty cool tool.  

So I gently pulled on the "fingers" inside the icemaker.  It DID NOT go into a harvest cycle. 

Link to comment
Share on other sites

Did the icemaker revolve under it's own power? Did you close the door switch? Is the icemaker getting power?

Link to comment
Share on other sites

The ice maker did not complete the harvest cycle.  I closed the door for a minute or two and came back to check it.  There were no changes in the finger positioning.  I did verify power from the four wire connector to the ice maker. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...