Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      1  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Bad gas valve? LGR7620LW0

Ajthefixer

By Ajthefixer
in DIY Appliance Repair Help

 Share

Recommended Posts

Ajthefixer

Ajthefixer

Posted
  • Author
Posted

Got it. I'll confirm tomorrow. I'm done farting around with it for today. When I took it apart before there was definitely gas when I lifted up the diaphragm. Also I got tired of reassembling the drum and I'm checking for flame with the door off and the wires connected. 

 

Link to comment
Share on other sites
  • Replies 32
  • Created
  • Last Reply

Top Posters In This Topic

  • Ajthefixer

    17

  • AccApp

    15

  • Aapltech

    1

Popular Days

Top Posters In This Topic

Popular Days

Aapltech Yamabushi

Aapltech

Posted
Posted (edited)

If you hear hear primary valve click.. then a buzz.. almost always valve coils not actuating valve cores correctly. Replace with new valve coils on primary and secondary and test again..., sometimes with valve coil failures it will also take a few cycles to see the valve failure once the coils heat up a bit..

 

Edited by Aapltech
Link to comment
Share on other sites
Ajthefixer

Ajthefixer

Posted
  • Author
Posted

I haven't had a chance to put it all back together and check for gas at the valve plug. I'm about done farting around with it and am ready to just replace the valves. I'm stubborn,but my time is also limited. I have stupid hours in this thing already.

Link to comment
Share on other sites
AccApp Sensei

AccApp

Posted
Posted

You can use any White-Rodgers dryer gas valve, just reuse your current orefice. My parts guy's cheapest one was in a Samsung bag oddly enough.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...