Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. 
      I'll be posting a couple more tech sheets before Saturday so be sure to follow this event to keep up with the tech sheets we'll be going through. 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

My DCS-RG-364GL oven doesn't light


Dave415

Recommended Posts

When I turn on the oven the igniter turns on and after 30 seconds the gas comes on. I can smell gas but it doesn't light.

I have replaced the igniter with the same results. If I gently blow on the igniter while the gas is on the gas will ignite.

Any thoughts? Thanks, Dave.

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • AccApp

    2

  • Dave415

    2

  • certified tech group 51

    1

What condition is the burner tube in? Is it properly positioned? Did you use the correct igniter?

Link to comment
Share on other sites

The burner tube seems in good shape. I took it out and cleaned the holes. Nothing seemed wrong. I used an aftermarket lighter that replaced the factory 211541 lighter.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...