Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Electrolux Steam Dryer control lock stuck


LaughingRaven

Recommended Posts

LaughingRaven

My new Electrolux Perfect Steam Dryer  (EFME617STT) had the Control Lock activated and now it won't unlock. I've tried unplugging it, holding various combinations of buttons, and anything else that seems vaguely relevant and can be found online. All to no avail. Does anyone know how to do a factory reset on these machines, or what magic process will remove the control lock from my machine? 

Thanks!

Link to comment
Share on other sites

  • 2 weeks later...
  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • AccApp

    2

  • LaughingRaven

    2

  • kokomo

    1

  • dvd

    1

On my whrlpl washer the control unlock is same as the locking procedure hold three seconds. Check your user manuel may be located in lower section of machine may have to take off a cover.

 

Link to comment
Share on other sites

From the user guide:

lock
To lock the controls between cycles, scroll to the lock option and press set. “ ” will be displayed on the panel. To unlock the controls scroll to the lock option and press set. Use this feature to reduce the likelihood of accidental operation by children.

 

Link to comment
Share on other sites

LaughingRaven

Yeah, the first thing i did was hold the button for 3 seconds. And I read the user guide. When i said i tried everything I literally tried everything. I had to call a service guy who had to call the manufacturer to find the super secret combination of buttons to unlock the control panel. He couldn't even properly remember it after he did it. Not the sort of thing an average home owner would ever be able to sort out on their own, and nothing that was in the owners manual.

Link to comment
Share on other sites

  • 2 years later...
  • 1 year later...

Grasshoppah, 

 Some one earlier today tried to extract $10.00 Can (fully refundable) for 150 free casino  spins, 

I'll be 79 in may so am older than us new president, then when I went to dry my sheets & pushed the wrong button , I got directed to a site that was going to give me the answer after I gave then $5can (fully refundable) well I didn't do it!

Now GrassHoppah you tell me answer, but you say push SET!

(there is no SET on my machine , so the Good guy on my shoulder said go for something close..

 There is a Select button..

Thank you & and thank those that cannot be named it did not set fire to the place! 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...