Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE Dual Fuel Tech Sheet Please 31-21188


Joe B, Stoughton Appliance Repair

Recommended Posts

Manufacturer: GE
Type of Appliance: Range
Model Number: J2B918SEK3SS
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

Looking for a tech sheet please.  per my PD site, the document number is 31-21188.

Thanks.

 

Link to comment
Share on other sites

  • Team Samurai

Sorry about the delay in getting this for you, Joe— lots of stuff going on down here in Florida at ASTI! Stay tuned for the full story!

 

Link to comment
Share on other sites

@Samurai Appliance Repair Man

Thanks Scott, much appreciated!

Wish I was at ASTIm but my wife said "there is no way you're leaving me alone with a baby for one week"..I didn't really have a strong argument against that. 

Thanks again!

  • Like 1
Link to comment
Share on other sites

  • Team Samurai

I didn’t you’re a new daddy— congratulations, Joe! ??

Link to comment
Share on other sites

×
×
  • Create New...