Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Maytag Whirlpool MFI2269VEM3 front display dead and not cooling


tweak_four17

Recommended Posts

tweak_four17

Hey guys,

Got a Maytag Whirlpool side by side fridge model MFI2269VEM3 and yesterday morning the front panel had no lights of readings on the LED display. The inside is no longer cooling or freezing, however there is still power to the unit as the light on the inside is still on and if I push a button on the front panel all the lights lighs up and the display reads 8888 (ie, all possible number combinations). I tried various button combinations I found somewhere on the net to try to reset it. Tried unplugging it and plugging it back in. Neither worked unfortunately.

Any idea what the problem could be? Bad control board I'm guessing but which? The dispenser or main? or maybe something else thats easier like a fuse or something? Any insights are appreciated!

Thanks!

Tweak

Link to comment
Share on other sites

  • 2 months later...
  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • tweak_four17

    2

  • Sammygirl

    2

  • LearningTech

    1

tweak_four17

Hi there, turns out the main control board in the back was the problem, replaced it and re-programmed the code found inside the door and everything works again.

Link to comment
Share on other sites

Its nearly always the control on the back. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...