Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

KFXS25RYMS4


herfdog

Recommended Posts

Is there a heater or something to stop the freezer drain from freezing up and overflowing? The evaporator defrost function is working properly.

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • herfdog

    2

  • 16345Ed

    2

  • Lighthouse

    1

  • Rhubarb Tau

    1

Top Posters In This Topic

I don't know of a factory drain heater, but I've used the aluminum drain probe from the Samsung leakage kit DA82-01415A . 

This unit also is subject to the P-Trap bulletin W10632338B , which can cause frozen defrost drains from guk glueing the original duckbill shut , calls for replacing the duckbill with P-Trap W10619951

Link to comment
Share on other sites

38 minutes ago, Rhubarb Tau said:

I don't know of a factory drain heater, but I've used the aluminum drain probe from the Samsung leakage kit DA82-01415A . 

This unit also is subject to the P-Trap bulletin W10632338B , which can cause frozen defrost drains from guk glueing the original duckbill shut , calls for replacing the duckbill with P-Trap W10619951

Yes to this...

 

Someone on here turned me on to aluminum fence ties for drain probes. Easy  to bend, shape and cut to size. Cheap.

 

Link to comment
Share on other sites

I keep a couple of the Samsung drain heaters on the truck.

Part number: AP5579885

Part number: AP5579885

I keep a bag of the fence ties in my steamer bag. I have used them on the units that the above doesn't work on. 

As stated above this particular unit most likely needs the P-Trap update.

Part number: AP5780744

Part number: AP5780744

Also carry this on truck

Part number: AP3119957

Part number: AP3119957

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...