Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE Monogram ZDP30L4D2SS door hinge

marksmanD

By marksmanD
in DIY Appliance Repair Help

 Share

Recommended Posts

marksmanD

marksmanD

Posted
Posted

My GE Monogram ZDP30L4D2SS door does not close completely. Hinge functions fine and door

is well balanced, but there is a small gap at the top. is there anything I can do to adjust it besides

buying new very expensive door hinges?  $275 cost of hinges

Link to comment
Share on other sites
  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • marksmanD

    3

  • johntech

    2

  • Jedi Appliance Guy

    1

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

johntech
johntech

No adjustments on this one. Open the door and make sure it does not open more then 90 degrees. If it does I would replace the hinge receivers with the hinges. Part number: WB10X5226 Pa

Jedi Appliance Guy Sensei

Jedi Appliance Guy

Posted
Posted

Perhaps it's become partially uninstalled. Remove it and reinstall it and see if that helps. Instructions should be in your owners manual.

Link to comment
Share on other sites
marksmanD

marksmanD

Posted
  • Author
Posted

Just took door off again   lower screws on the hinge receivers were a bit loose  tightened and situation is improved  /acceptable but not quite perfect

Link to comment
Share on other sites
johntech Sensei

johntech

Posted
Posted

I’d also check the door seal. If the door does not shut all the way the door seal can harden and allow heat to escape the oven causing damage to the lock and other components.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...