Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore Top Load Washer model 110.2513410


Jrod18

Recommended Posts

I have a model 110 2513 410 Kenmore top load HE washer that doesn’t want to go into the wash cycle. Lid locks load sensor appears to be working but won’t engage in the wash cycle. Any help would be appreciated.
So far I have unplugged and restarted, tried different cycles, water is working fine.

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • Jrod18

    3

  • darren412

    2

  • johntech

    1

Top Posters In This Topic

It needs to be looked at by a technician that knows how to pull up the error codes in the machine. You have to start first by seeing what if any error codes have been recorded by the main control. Then go from there 

Link to comment
Share on other sites

29 minutes ago, Jrod18 said:

Appreciate you getting back to me Darren.

Thank.

Without any more info on its earliest error codes . The avenues from where to start can be slim for you especially if you do not have any experience with working on these machines ???

Link to comment
Share on other sites

Make sure the pulley has not  came loose. Tilt the machine back and remove cover  for inspection. If it has came loose reassemble with locktight, There is normally a tech sheet in a sleeve glued on the inside of the cabinet. You can reach it from the bottom with the machine tilted back. It should be on the front left hand side near the top. That will give you instructions on pulling the error codes.

15 hours ago, Jrod18 said:

Any help would be appreciated.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...