Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Manual request


ifixit

Recommended Posts

Manufacturer: Bosch
Type of Appliance: Dishwasher
Model Number: SHP7PT55UC/07
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

I took model back to shp are codes the same ?

Link to comment
Share on other sites

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • ifixit

    3

  • Samurai Appliance Repair Man

    2

  • 16345Ed

    2

Top Posters In This Topic

Oh I see your question now... I believe so...

I’d request a tech sheet if I were you. 

Link to comment
Share on other sites

I have a tech sheet but find them to be too small to read. (old guy) 

Link to comment
Share on other sites

  • Team Samurai
18 minutes ago, ifixit said:

I have a tech sheet but find them to be too small to read. (old guy) 

Same problem. That’s why I download all tech docs as PDFs to my iPad and then blow them up to see the details. 

Link to comment
Share on other sites

Also, I find the bosch tech sheets to be not very helpful...

Link to comment
Share on other sites

  • Team Samurai

They’re formatted a bit differently from other manufacturers but once you get used to them, they’re a very helpful troubleshooting tool. Especially the schematic. 

Link to comment
Share on other sites


×
×
  • Create New...