Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

WHIRLPOOL WASHER WFW84HEXR2


JOHNNEY RODBEARING

Recommended Posts

JOHNNEY RODBEARING

washer has code F6 E1   ran test as per tech sheet    test #1 ok   when i went to do test #3 it would not run quick test   just sat on test C00   would lock door an that it    cleared codes   tried to run  quick test a second time   started at test C03    ran test slowly it took 10 min a then stopped   order a CCU  W10427967  (OLD CCU W10406607)   put new CCU in an washer will not power up        check for power at CCU ok   put old CCU in an washer powers up door locks  select cycle and it count down for 5 mins and then sets code F6 E1   try to run quick test   no go   return new CCU for second one   same thing    why does it power up with old but not with new   ( FYI  I am auto tech)     thank you for your help

 

Link to comment
Share on other sites

Model number no good

F6E1 error code is usually the MCU. Take it out & look for bulging capacitor or burn marks. 

F6E1 can also be bad connection between the CCU & MCU.

Link to comment
Share on other sites

make sure you also check the m13  wire harness connection's  and it's wiring f rom the CCU to the MCU. Especially  where they are coming out of the wire harness at each end. make sure the connections  will be making good contact when plugged into MCU and the CCU.   Also Make sure there are no breaks in the wiring with a continuity test.  If thats all good  as Light house has mentioned it will most likely be associated with the MCU.  Not that the MCU is definately your Problem but it is commonly associated with the MCU  as being your problem when it comes to that F6 E1 error code.   If you decide to change the MCU.  Get it from repairclinic.com  or partspros.com     you can return it with them if it does not solve your issue.   Make sure you take your time and reinstall it properly when its replaced .  All wiring must be tight and properly fitted again.   Definately get back with your findings here also as to whether or not your problem was fixed if you replaced the MCU  OK.

  • Like 1
Link to comment
Share on other sites

  • 2 months later...
JOHNNEY RODBEARING

Replaced mcu and installed new ccu.The machine would not start or power up   installed old ccu and it powers up and runs   ran quik test in 5 min

sent ccu back to supplier for refund   whirlpool must have a bad batch ccu or a software problem as I tried 2 new ccu     SORRY FOR LATE POST

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...