Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool WRF989SDAM03 Ice Maker and Water Dispenser problem


Doc99

Recommended Posts

Looking for help in fixing a problem with a WRF989SDAM03 fridge. The ice maker stopped making ice and the water dispenser stop working. If I power cycle the fridge, both will work for a while. The water dispenser will work for maybe an hour and the ice maker will work for a day. The dispenser switch always operates the ice motor so it seems good. 

I ran the diagnostics on both of them and they pass. The Dispenser switch passes the diagnostic test.  If I use the diagnostic code to manually operate the water  valve, it will dispense water. Exit diagnostic mode and the water dispenser doesn't work. Cycle the power and both work for a while.

I'm thinking that this is a main board issue. However, that is a very expensive part to swap out as a test. I want to rule out other causes first. 

I appreciate any help in trying to fix this. 

Thanks,

Cary

Link to comment
Share on other sites

  • Replies 8
  • Created
  • Last Reply

Top Posters In This Topic

  • Doc99

    5

  • Koi Guy

    3

  • Budget Appliance Repair

    1

I have changed out the HV board to correct your condition. Several times actually...

Link to comment
Share on other sites

Thank you for your help and patience. You are talking about the control circuit board (in the middle section of the board area) which is the largest board? I was confused by HV.  HV to me  means high voltage which would be a power supply. 

The control circuit board is the logical culprit. Also the most expensive. I was hoping it would be something else.

Link to comment
Share on other sites

Part WPW10589837

I was surprised to find it cheapest at Sears $108.05. Marcone $265.54. Repair Clinic $311.70. 

Edited by Koi Guy
Link to comment
Share on other sites

@Doc99If you get back here in time before you order you can get another 10% off - in the discount CODE box on the order page enter PARTS.

 

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...