Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Maytag Refrigerator


tmckinneyebony

Recommended Posts

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • Lighthouse

    2

  • tmckinneyebony

    2

  • darren412

    1

Top Posters In This Topic

Posted Images

Tech sheet should be taped to the under side of the fridges bottom near the front behind the kick plate grill.    On the schematics it looks like jumping brown wire #5.  To white Eire #6. Should give you a forced defrost.  Contacts  are located on the EDC board 

Edited by darren412
Link to comment
Share on other sites

14 hours ago, darren412 said:

Tech sheet should be taped to the under side of the fridges bottom near the front behind the kick plate grill

Find the tech sheet and on page 1 it tells how.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...