Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

2008 Bosch range model HES 235 C–02 digital display went blank, oven still works

Sabrina Clough

By Sabrina Clough
in DIY Appliance Repair Help

 Share

Recommended Posts

Sabrina Clough

Sabrina Clough

Posted
Posted

Returned home from a trip to find my Bosch oven display blank and touchpad unresponsive. Powered off at breaker to reset– no change. Inspected the control board to find a burned spot obscuring one corner. Used eraser on ribbon contacts anyway and reassembled... Barely audible "Beep" said it was still alive, so I went thru the finger strokes blindly and started baking using a grill thermometer. Sometimes the touchpad is responsive, sometimes not. I can't get anyone to come out this far to diagnose or repair or accept a carry in and Bosch is no help unless I want to purchase a new, nonrefundable control board and who would do THAT especially since it actually does work, you just can't see what it"s doing via the digital display. Is there any hope of repairing this?

Link to comment
Share on other sites
  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • LearningTech

    2

  • Sabrina Clough

    2

Popular Days

Top Posters In This Topic

Popular Days

LearningTech Sensei

LearningTech

Posted
Posted

Burn mark if corner of display is normal part of how its made, likely bad control 

 part from repair clinic has a 365 day return policy installed or not

Link to comment
Share on other sites
Sabrina Clough

Sabrina Clough

Posted
  • Author
Posted

Thank you for the response.

Do you mean that repair clinic sells control boards that can be returned if the new one doesn't fix the issue?

Link to comment
Share on other sites
LearningTech Sensei

LearningTech

Posted
Posted
On 11/27/2018 at 12:27 AM, Sabrina Clough said:

Thank you for the response.

Do you mean that repair clinic sells control boards that can be returned if the new one doesn't fix the issue?

Yes that is what i mean... Your welcome

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...