Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Frigidaire Front Load Model #GLTF2940FE1 Not starting

JML

By JML
in DIY Appliance Repair Help

 Share

Recommended Posts

JML

JML

Posted
Posted

Hi all, I am remotely (we are in different states) trying to assist my daughter resolve a new issue with her washer which is a Frigidaire Front Load Model #GLTF2940FE1. She and husband are very mechanically capable. The original symptom was that the washer stopped running in the middle of a wash cycle. I have some experience with appliance repair though most recent years but most recently work exclusively on HVAC. After unloading the clothes and draining the washer they were told the pump was bad (the was not jammed and it pump spun freely). The pump was replaced, The empty washer will not start. I assume the first thing to occur would be to fill with water. This is not happening. I did clarify that the door does lock. When the start button is pressed there is a clicking but the washer does not start to fill or show any other sign of life except the clicking. Any suggestions would be very much appreciated. Thank you 

Link to comment
Share on other sites
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • JML

    1

  • 16345Ed

    1

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

16345Ed
16345Ed

Sounds like bad door latch/lock.  If you remove the top you should find tech sheet with diagnostics tests. 

16345Ed Sensei

16345Ed

Posted
Posted

Sounds like bad door latch/lock. 

If you remove the top you should find tech sheet with diagnostics tests. 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...