Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

FPMC3085KFB wall combo, microwave access?

jay jay

By jay jay
in DIY Appliance Repair Help

 Share

Recommended Posts

jay jay

jay jay

Posted
Posted

I need to check out a microwave oven.  Unusual noise, now no heat.  
My question is, do I have to pull the whole oven / microwave out of the wall?
Perhaps there is access if the control panel is removed, but I don't think so.
I plan on looking at the unit for the first time tomorrow, but am hoping for a heads-up.

Yes, I am aware of the HV hazard.  I am a ham radio operator and familiar with the HV safety procedures.

Saludos

Link to comment
Share on other sites
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • jay jay

    2

  • darren412

    1

Popular Days

Top Posters In This Topic

Popular Days

darren412 Sensei

darren412

Posted
Posted

its possible if you just remove the trim kit around the microwave , that the microwave may just slide out after that.   I dont think the microwave is attached at any point to the oven. Its possible but I dont think it is.  Sounds like you just need a new mag and diode.   good luck

Link to comment
Share on other sites
jay jay

jay jay

Posted
  • Author
Posted

Thanks Darren,

There is a mounting frame installed on top of the oven and the microwave is mounted to it.  Very difficult to reach the screws.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...