Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE Glass Top Elect Range

atcherservice

By atcherservice
in DIY Appliance Repair Help

Recommended Posts

atcherservice

atcherservice

Posted
Posted

I have a GE elect glass top range. M# jp968bc1bb I am getting an error code  flashing the F131 code. This only happens when when the center (small 6 inch elemt is turned on).  I feel that I may need to change the touch pad and contol boad. Has anyone had any experience with this unit, any suggestions????:dude:

Link to comment
Share on other sites
  • Replies 2
  • Created
  • Last Reply
  • Team Samurai
Samurai Appliance Repair Man Sensei

Samurai Appliance Repair Man

Posted
  • Team Samurai
Posted

I've never done this repair on this model, it looks straightforward on this diagram. Looks like a putty knife all the way around awwta do it.

Link to comment
Share on other sites
atcherservice

atcherservice

Posted
  • Author
Posted

Thanks will try it, I believe that the logic or (not so) smart board is bad.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...