Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore Electric Dryer 110.68132413


ancel1961

Recommended Posts

I have a Kenmore Electric Dryer model 110.68132413 that's not getting any power to the control panel or the drum light.

Outlet and power cord are good.

Continuity from the power cord to the control board [Black Line 1] and motor [Red Line 2] are both good.

The wiring diagram is missing from the dryer.

I'm not experienced with live voltage testing so I would appreciate any pointers you guys could give me.

Once again, the control panel will not light up at all.

Thanks

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • ancel1961

    2

  • sh2sh2

    1

  • 16345Ed

    1

Top Posters In This Topic

Check for proper power at terminal block (where power cord connects) from the outer 2 terminals you should read 240 volts, from one outer to the center should read 120 volts

Link to comment
Share on other sites

Hi sh2sh2,

I didn't get 120 volts or 240 volts from the terminal block.

I plugged another dryer into the same outlet, and that dryer worked perfectly.

Thanks for replying

Link to comment
Share on other sites

Sounds like bad dryer cord. If power at outlet and none at terminal block. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...