Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE Hotpoint text sheet Force defrost


Bintiwangu

Recommended Posts

Manufacturer: Hotpoint ge
Type of Appliance: Sxs frig
Model Number: HSS25GFTAWW
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

Hello Sam I did a search and found where someone requested the same Hotpoint manual and your dad posted a Mini manual for a GE A4425GTDA which he said was the same thing. So I have the schematic but I do not know how to force it into a defrost so I can check the control board Etc.  sincere thanks in advance. Kevin

Link to comment
Share on other sites

  • Team Samurai

The diagnostic routine on these Arctica units is more trouble than it’s worth, IMHO. Here’s an easy way to force defrost manually then check the amp draw on that circuit. 

 

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...