Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore frig manual please


Bintiwangu

Recommended Posts

Bintiwangu
Manufacturer: kenmore
Type of Appliance: frig
Model Number: 596.73504201
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): yes

I searched *735* etc...

Found a 4200 suffix, but not 4201. I'm still rather confused about how to tell if that's close enough.

Thank you!

Link to comment
Share on other sites

  • Team Samurai

This one should be close enough to apply to your model -- I'm not finding anything closer.

 

  • Thanks 1
Link to comment
Share on other sites

Bintiwangu

Thank you Sam, I believe that's the one I saw.  and thank you Vance!

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...