Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Oven door seal


megadan66

Recommended Posts

I've found the door seal for this,with no help from the model #.It's the old mesh wire covered with some sort of woven fabric.All I need to know is if you have to take the door apart to install it.......Thanx.............Megadan

post-9323-129045091957_thumb.jpg

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply
  • Team Samurai

Yep, take door off the hinges, lay on a protective pad and then remove the obvious screws to disassemble and replace the gasket. Just keep track of how everything goes back together, may want to take pictures as you go. They're all pretty similar, this post at my blog has some photos that will give you an idea of what to expect: http://fixitnow.com/wp/2006/06/09/removing-the-door-gasket-on-a-dacor-range/

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...