Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Maytag dryer shutting off Mgdx500xw1


Nicky

Recommended Posts

Dryer shutting down after seconds or minutes.  Shows wet clothes symbol then completely shuts. Starts right back up.  Does it on air dry also.  Door switch seems ok.  Haven’t checked it out yet but wondering if  possible sensor.  Took apart few months ago and installed new pulley, rolllers, belt and cleaned out. ?? Thanks

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • Nicky

    3

  • 16345Ed

    2

Thanks.  That will be the first thing I check, but it’s doing it on air dry only also.  I also recently cleaned out whole system.  Could it be centrifugal switch on motor? It does it Whether it’s on timed drying or other cycles. Just peculiar it shows wet clothes readout from sensor system right before shutting off. I think when being tested with dry clothes it does this also. May go there tomorrow and check it out.  

Link to comment
Share on other sites

Never heard of centrifuge switch causing it to shut down. 

Even air fluff, needs airflow. 

Follow troubleshooting procedures from tech sheet or manual. 

Thermistor, moisture sensor, thermostats, etc...

Link to comment
Share on other sites

  • 3 weeks later...

Took things apart blew it out again but I think taking a fine grit sandpaper to the moisture sensor did the trick.  I still don’t know why it should show “wet” flashing when it failed.  Can’t find anything on this being an error code.  

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...