Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Need exact manual


allen63

Recommended Posts

Manufacturer: Maytag
Type of Appliance: Top load washer
Model Number: Mvwb835dw1
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

 Need exact service manual for model number MVWB835dw1.  This is the new bravo XL Maytag Toploader washer .  I tried the Cabrio service manual 2014 and the diagnostic was to press three buttons three times within eight seconds and it’s not going into diagnostic mode .  Seeing somebody else on the post trying this method and did not work either.

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • allen63

    3

  • Son of Samurai

    1

  • Captain Dunsel

    1

Top Posters In This Topic

  • Team Samurai

This is the tech sheet that Whirlpool says applies to your exact model. See if it's what you need:

 

Link to comment
Share on other sites

Within 8 seconds,

 Press and Release the 1st selected button, Press and Release the 2nd selected button, Press and Release the 3rd selected button; Repeat this 3 button sequence 2 more times.3. If this test mode has been entered successfully, all indicators on the console

will be illuminated for 5 seconds with “888” showing in the three-digit display and a tone will sound. If there are no saved fault codes, the seven segment display will come back on and display “888”. Upon entry to Service Diagnostic mode, all cycles and options reset to factory default. In the tech sheet!

Link to comment
Share on other sites

Yes, I tried that diagnostic dance pattern and it’s not working.  I guess that has to be main control board then because it’s not going to diagnostic mode.  Thanks 

Link to comment
Share on other sites

 Just wanted to give an update. I think the main reason why it wasn’t spinning intermittently was because there was a lot of coins in between the wash plate and the inner tub.  I did replace the main control board because I couldn’t get the original main control board in diagnostic mode.  The second time trying to get  the new board into diagnostic mode what’s not so easy .  Instead of hitting 3 selected buttons 3 times in eight seconds I had to do it about five times in 8 seconds. 

Link to comment
Share on other sites


×
×
  • Create New...