Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      1  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore dishwasher 66531849k603

Tryin

By Tryin
in DIY Appliance Repair Help

 Share

Recommended Posts

Tryin

Tryin

Posted
Posted

Hello, kenmore dishwasher that doesn’t light up or turn on.

I checked continuity of the thermal fuse, it’s good.  I checked the continuity of the door latch, good.  Also the door seems to be working perfectly.

To see if the problem was with the touch buttons or the main circuit board I disconnected the power source unplugged the ribbon wire for the touch panel from the circuit board and turned the power back on and closed the door.  Dishwasher ran a drain cycle.  So I am assuming my problem is the touchpad control panel?

i would like to know if it sounds like I’ve done the right thing here, also if it is the touchpad/control panel where is a reputable place to buy parts from shipping to Canada?

thanks

Link to comment
Share on other sites
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • ApplianceLearner

    1

  • Vance R

    1

  • Tryin

    1

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

ApplianceLearner
ApplianceLearner

I agree with Vance, the touch panel is probably bad.  sometimes they will put too much of a load on the dc power supply which feeds the touch panel and load it down so it appears you have no power.

Vance R Sensei

Vance R

Posted
Posted

Believe that is the correct test to see if you have a module problem or key pad problem.  You came to the correct conclusion.

Link to comment
Share on other sites
ApplianceLearner

ApplianceLearner

Posted
Posted

I agree with Vance, the touch panel is probably bad.  sometimes they will put too much of a load on the dc power supply which feeds the touch panel and load it down so it appears you have no power.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...