Lost with the new appliances? The Samurai teaches you Circuit Fu…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
  • Announcements

    • Samurai Appliance Repair Man

      Webinar Recordings Index Page   10/03/2017

      On-demand appliance repair training videos for Professional Appliantologist members Over 30 hours (and growing!) of original, high quality appliance training webinars developed and given by yours truly are at your fingertips, on topics you won't find anywhere else. Fill in those knowledge gaps, strengthen those areas of uncertainty, and boost your skills. Watch on mobile or desktop at your convenience whenever, wherever.  Ultra Short Primer on Basic Electricity, Circuits, Ohm's Law, and Schematic Reading (Length: 1:04:48) Basic Refrigerator Troubleshooting (Length: 1:10:45) Schematic Reading Workshop, 10/2015 (Length 1:19:08) Troubleshooting Strategies for Computer-Controlled Appliances (Length: 48:34) Semiconductors and PN Junctions (Length: 1:04:37) Appliance Temperature Sensing Devices & Technology (Length: 1:27:33) Voltage Measurements, Meters, Ghost Voltages, and Triac-controlled Neutrals (Length: 1:29:32) Troubleshooting with Tech Sheets, Part 1, 4/2016 (Length: 1:09:26) Troubleshooting with Tech Sheets, Part 2, 4/2016 (Length: 1:21:11) Tech Sheet Review, 4/9/2016: Bosch Speed Cooker, Amana Refrigerator, GE Glass Cooktop Range (Length: 1:22:58) Pulse Width Modulated (PWM) Switches used in Samsung Switched Mode Power Supplies (SMPS) (Length: 27:07) PWM Computer Cooling Fan in a Whirlpool Refrigerator (Length: 14:53) Understanding AC Split-phase Household Power Supplies (Length: 52:41) Troubleshooting a Samsung Electric Dryer without Disassembly using Live Tests and the Schematic (Length: 22:47) Troubleshooting a Bosch Dishwasher No-Heat Problem using the Schematic and Live Tests (Length: 15:38) Linear Motors and Linear Compressors (Length: 55:54) Bi-directional PSC Drive Motor Systems in Whirlpool VM Washers (Length: 56:52) Appliance Service Call Structure and Troubleshooting Strategies (Length: 1:00:16) The Ten Step Troubleshooting Tango and Workshop Exercises (Length: 1:35:39) Troubleshooting Ten-Step Tango Advanced Workshop (Length: 1:32:06) Ten-Step Tango Troubleshooting Workshop: Refrigerators (Length: 1:35:57) Whirlpool Duet Washer Schematic Analysis & Whirlpool Dryer Moisture Sensor System (Length: 1:03:04) Neutral Vs. Ground, Inverter Microwave, Digital Communications, Loading Down in DC loads, and more! (Length: 1:14:45) Gas Oven Service Call After a Parts Changing Monkey (Length: 36:04) AFCI and GFCI Circuit Protection Technology (Length: 41:26) Troubleshooting Samsung Refrigerators and more (Length: 1:29:58) 3-way Valves and Dual Evaporator Refrigerators (Length: 1:15:45) Split-Phase Compressors and PTC Start Devices (Length: 1:11:57) Gas Dryer Ignition Systems (Length: 53:50) Refrigerator Sealed System Thermodynamics, Part 1 (Length: 43:07) Refrigerator Sealed System Thermodynamics, Part 2 (Length 1:09:09) To access these webinars and all the other info-goodies here at Appliantology, become a Professional Appliantologist today. If you need cost-effective, time-flexible, state-of-the-art appliance technical training, check out the Master Samurai Tech Academy.
    • Samurai Appliance Repair Man

      [Webinar] Practical Refrigeration Sealed System Thermodynamics - 10/30/2017 @7PM ET   10/19/2017

      Having laid some theoretical groundwork in the last webinar, we're going to focus on practical considerations in this one. Here are the topics we're going to discuss: Review homework from the first session on 10-2-2017. Home refrigerator practical design and operating rules-of-thumb useful for troubleshooting Practical application exercises Troubleshooting scenario exercise Techniques for making system temperature measurements for determining superheat and subcooling Sealed system diagnosis homework assignment (to be reviewed in the next webinar in this series) See this calendar event for more details                   

Archived

This topic is now archived and is closed to further replies.

karnovking

AC power usage

Recommended Posts

karnovking

One of my in-laws and I have been disagreeing on a topic which I could use some insight on. 

This concerns a window AC.  She says if she leaves it run all day long and turns it down a little when she is at work, she would save more electric than turning it off completely for those 8-10 hours.  She thinks it will run harder cooling down the hot house.  (AC does not have a thermostat to shut it down when the room is at set temp)

 

I say it runs the same whether the room is hot or cool and having it run all day is just a waste of electricity for those 8-10 hours she is gone.  Any thoughts? 

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Northern-Tech

   This is a window air conditioner, but does not have a T- stat to shut it down at some temperature ?? Was it removed in the past, and goes full blast all the time ?? If that is the case, this is not a good scenario. As far as energy conservation, the only was to find out for sure, would be to put a  meter to record the KWs used. However, my personal experience on this is.... I have a house, approximately 3000 sq. ft. I have a small 10,000 btu window air conditioner.

It runs quite a bit for a day or so, cooling down the house. However, after that, it cycles off and on, depending on the temperature. For me, it sure is nice to come home to a comfortable environment. Now, with the price of electricity going through the roof, that may have some bearing on your decision.

Share this post


Link to post
Share on other sites
Jedi Appliance Guy

   Ah Grasshopper. In order to be at oneness with the Force we must first understand certain principles.  Heat energy is a Force.  It flows all around us.  It "wants" to spread around and be everywhere.  Cold is the absence of heat.  Heat energy travels toward cold.  Your air conditioner takes heat from one place and puts it in another using these laws of nature..

   Now let us look at your in laws place.  There is heat in the air.  There is heat in the walls.  There is heat in the ceiling.  There is heat in the floor. There is heat in the furniture. It's like the Force... It's everywhere.  All these things store heat.  There are different names for these different kinds of heat in these different places, but we won't get into that here. 

   The air conditioner removes heat (and humidity) from the air.  That is why it is called and air conditioner.  Even if  you "cool" the air, there is still heat in the floor, walls and ceiling.  These things will release their heat into the air as it is cooled.  

  Therefor it is best not to allow the solid matter in your home to store extra heat during the heat of the day.  There are other ways of achieving this other than leaving your A/C running.  Good insulation for one.  Generally on the central systems I service, I recommend setting the thermostat a few degrees higher while away, but never off.

Share this post


Link to post
Share on other sites
karnovking

This AC has a manual thermostat as in if you want to turn it down you actually have to turn it down yourself.   unlike my window AC which will cut the cool and just run the fan when the room reaches the set temp. 

Share this post


Link to post
Share on other sites
applianceman18007260692

down here its cheaper to let the ac run all the time and keep the house cool than it is to try and start cooling the house only when you are at home unless yu live in a midget house. she should set the temp on 3 or 4 to keep the house at least tepid till she returns home and then jack that tstat up to the moon.

Share this post


Link to post
Share on other sites
Guest ahammer48

Hello

I agree with all of the above post,  but to actually answer Ur question;), U will save more energy by turning it off then letting it run all day. Strictly from an energy point of view.

From a comfort point of view I agree with the Force.

I'm concerned about the stat?? Do U have to turn the unit off when its cold enough. There's no temperature knob on it? If there is one then it sounds like the stat is bad or at the very least out of calibration.

:)

 

Share this post


Link to post
Share on other sites