Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Delayed Ignition

BAHDEETS

By BAHDEETS
in DIY Appliance Repair Help

 Share

Recommended Posts

BAHDEETS

BAHDEETS

Posted
Posted

I have a G.E. Range/Oven model JGSP33WEV5WW  that does not ignite properly - it is delayed.     Can you tell me what part I need to replace, where it is and how difficult is it to replace.   And maybe help me with a replacement part number.

Link to comment
Share on other sites
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • 16345Ed

    1

  • Vance R

    1

  • BAHDEETS

    1

Popular Days

Top Posters In This Topic

Popular Days

Vance R Sensei

Vance R

Posted
Posted

Most like suspect is a weak ignitor. Should draw 3.2 to 3.7 amps when on. Any square norton style ignitor will work. Usually fairly easy to replace.

Link to comment
Share on other sites
16345Ed Sensei

16345Ed

Posted
Posted
On 8/18/2019 at 5:03 PM, BAHDEETS said:

I have a G.E. Range/Oven model JGSP33WEV5WW  that does not ignite properly - it is delayed.     Can you tell me what part I need to replace, where it is and how difficult is it to replace.   And maybe help me with a replacement part number.

You’re working with natural gas and sound like you have no clue on what you are doing. Wouldn’t it be safer for you and your family to call a professional?

I know we all want to be DIYers but sometimes safety should be considered. 

You should see the wiring I’ve had to correct in my House because previous homeowner was a DIYer. Wire connections not in boxes etc..,

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...