Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore undercounter Ice Maker


Knot_enuff

Recommended Posts

I have a model 106.89553100 Ice Maker and I am having an issue with it overfilling the water tray.  I recently replaced the control board and the water valve and it now is making ice again but it is overflowing into the bin and melting most of the ice.  I looked at the area where the pump is located for a water sensor and this model does't seem to have one unless it is mounted some other place I can not see.  Does anyone have any suggestion on how to regulate the water flow so it will cut off when full?

 

Thanks for your help!!

 

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • Quick

    1

  • Knot_enuff

    1

Popular Days

Top Posters In This Topic

@Knot_enuff

Water will run over the reservoir at times. This is normal. They are programed to flush from time to time. Are you sure you have the water sensor connection plugged in properly at the board? A quick check is to put it in clean mode, see if the clean LED light comes on. If the clean light does not come on the Water level sensor is disconnected. 

You seem to be a smart guy. Surly you have found the tech literature with your Ice Maker?  Look at test 10 in diagnostics. I'd want it set 4 blinks. That would be a normal size cube setting. 6 blinks is the thickest and two blinks is the thinnest setting.

Good luck with all that. 🙂

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...