Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    No upcoming events found

Hardwick gas stove PF3616-W-81R oven won't heat


Alison & Duncan

Recommended Posts

Alison & Duncan

 

we have a very old Hardwick gas stove, with no electrical connection.  We’ve been here almost 40 years and the previous owner 68 years before that.   

the oven has been working fine for decades, just stopped reliably coming on and staying on in the last few months.  

  Hardwick  PF3616-W-81R.   Hardwick was bought by Maytag, then Whirpool, the model # doesn’t find a match on either company’s repair and parts site, nor any website so far. We fear the stove is just too old to get parts, and hope it just needs cleaning but don't know how.  our stove has no electrical connection.  We’ve been here almost 40 years and the previous owner 68 years before that.   

. The pilot light is blue, gets larger and goes down when the temp. is turned up and apparently engulfs the sensing bulb.  Nothing appears to be out of alignment.   We hear the gas comes on, and if we repeatedly slam the door, moving air and jarring the oven a little, eventually the gas lights along the central gas flame tube, but also eventually goes out again, assumedly because the thermostat has turned off the gas.  We can also light it with a match from the front, when we hear the gas going, but again, it will eventually go off.  Any ideas?  It seems like the pilot light is just not reaching the gas emerging from the flame tube.

Link to comment
Share on other sites

Remove and clean the pilot assembly and make sure all the holes in the burner tube are clean, especially near the pilot, (the white ash build up around and near the pilot will plug the burner ignition ports.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...