Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore 110.68102310 Error codes f3 e2. No heat PLEASE HELP


CJ1

Recommended Posts

If someone could please help me, It would be greatly appreciated. I have a Kenmore 700 series dryer, mod#110,68102310. The dryer turns on and runs for about two minutes then shuts off with error code F3 E2. The thermister and fuse both are new due to neither one having continuity when checked so i replaced them both. Here is where it gets good, the heating element is not coming on. I checked continuity on it and havew about 12.3 ohms. Also i have 120v on BOTH pins. I put my meter ground to the casing and checked each while on. 120 on each...240 on both. HOW CAN THIS BE? I am seriously about to take my frustrations out on this thing. I read that the F3E2 was for the moisture sensor, so i checked it. No short found. No continuity.Someone PLEASE help . 

   Thank you in advance,

   C.J.  

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • evaappliance

    1

  • Ian B

    1

  • CJ1

    1

  • MrApplianceMechanicsburg

    1

Is the dryer vent clogged? Just because the thermistor isn’t shorted doesn’t mean it isn’t bad. That error is a faulty thermistor. Make sure the dryer vent isn’t clogged. 

Link to comment
Share on other sites

On 11/13/2019 at 7:41 AM, CJ1 said:

240 on both.

If your getting 240 at the element and it’s not coming on, it’s bad

Link to comment
Share on other sites

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...