Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact

Stay connected with us...

Subscribe to our YouTube channel for lots of appliance repair tips and help! Subscribe to our MST Radio podcast to learn secrets of the trade. Sign up for our free newsletter and keep up with all things Appliantology.

Pioneer

Thermador Diswasher Manual

Recommended Posts

Pioneer
Manufacturer: Thermador
Type of Appliance: Dishwasher
Model Number: DWHD94BP/19
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

Looking for a manual for this thing. Found a couple for DWHD* models but not with a 9 after. Need to get it into service mode and the procedures for the other series units was no applicable.

Unit will not send power to the water inlet valve. Gives a "check water supply" error if you leave it on long enough. Definitely not in flood mode. Definitely has water pressure, although shouldn't matter cause it's not powering up the inlet valve anyway.... Wiring harness looked ok.

 

Thanks! 

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Son of Samurai

This service manual applies to your model:

And here's the schematic:

 

  • Like 1

Share this post


Link to post
Share on other sites
Pioneer
On 1/13/2020 at 2:44 PM, Son of Samurai said:

This service manual applies to your model:

And here's the schematic:

 

Thanks but not sure that's it. Just like the other similar serv manuals I found they all want you to hold certain buttons, specifically cycle button, in order to initiate the various diagnostic features. This Thermador branded unit has no buttons. It has an LCD display and only like 4 capacitive/touch style controls. None of which are cycle selector buttons. This is more like the Miele style where you hit the + or - that corresponds to the selection on the right or left of the display you want to choose.

I think there's only 4 touch buttons total. I did try holding all possible combinations of 1 or 2 at a time while power the unit on and got no where.

There is a schematic on the unit but is just a simple diagram. No error codes, programming, or diagnostic info at all.

 

Thanks

Edited by Pioneer

Share this post


Link to post
Share on other sites
Son of Samurai
10 hours ago, Pioneer said:

Thanks but not sure that's it. Just like the other similar serv manuals I found they all want you to hold certain buttons, specifically cycle button, in order to initiate the various diagnostic features. This Thermador branded unit has no buttons. It has an LCD display and only like 4 capacitive/touch style controls.

I get what you're saying -- unfortunately, what I gave you is all I can find on Bosch's servicer site regarding your model's diagnostic mode. Their info can be spotty sometimes, and it looks like this is one of those times.

  • Like 1

Share this post


Link to post
Share on other sites
Pioneer
2 hours ago, Son of Samurai said:

I get what you're saying -- unfortunately, what I gave you is all I can find on Bosch's servicer site regarding your model's diagnostic mode. Their info can be spotty sometimes, and it looks like this is one of those times.

No worries. Appreciate you finding what you did.

Thanks

  • Like 1

Share this post


Link to post
Share on other sites
Pioneer

How many years has Bosch been making dishwashers where the control boards burn? They even moved it down to the bottom and still can't get it right...

 

 

IMG_20200121_120015.jpg

  • Like 1

Share this post


Link to post
Share on other sites

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.