Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore 790.71513400 Gas Range Oven Will Not Light

mzr

By mzr
in DIY Appliance Repair Help

 Share

Recommended Posts

mzr

mzr

Posted
Posted

I have a Kenmore 790.71513400 gas range that the oven will not light. When this started I assumed it was the igniter again, I had replaced it approximately three years ago. You could hear the relay snap after setting the oven temperature on the panel, but the igniter would not glow. I replaced the igniter, but it still does not glow/light. Again, you hear the relay snap, but that is it. I took apart the igniter wiring to check for bad connections or corrosion, and the smaller spade terminal on the gas safety valve didn't look too good. All of that is cleaned up now. I have not checked for voltage, would that be my net step?

Link to comment
Share on other sites
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • john63

    1

  • mzr

    1

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

john63
john63

Yes. Check for 120 volts to igniter...when oven has been turned on. If no voltage...failed Electronic Oven Control.  

john63 Sensei

john63

Posted
Posted

Yes.

Check for 120 volts to igniter...when oven has been turned on.

If no voltage...failed Electronic Oven Control.

 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...