Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore Elite 665.13183k800 Won't Start

kbilbee

By kbilbee
in DIY Appliance Repair Help

 Share

Recommended Posts

kbilbee

kbilbee

Posted
Posted

The dish washer will not start, a while back I replaced the motor and the washer worked for while. Then we started getting 6 - 1 blink pattern. We would do a diag and it would work for a while. Now it will not start and when pressing the Start/Resume button it blinks three times then the light shuts off.

Looking for suggestions on how to diag the issue?

Link to comment
Share on other sites
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • kbilbee

    2

  • Vance R

    1

Popular Days

Top Posters In This Topic

Popular Days

Vance R Sensei

Vance R

Posted
Posted

6 and 1 blink is a communication error between wash motor or diverter motor.  3 blink wasn't listed but indicates board thinks the door is open. Check the door switches and wiring. The tech sheet should be in the toeplate area.

Link to comment
Share on other sites
kbilbee

kbilbee

Posted
  • Author
Posted

Thanks I forgot about the tech sheet in the toe plate. The tech sheet indicates the three blink on the start/pause is and a blinking clean LED indicates control detected motor and or heater problems.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...