Installation of New Moisture Sensor on Maytag Condenser Dryer #MYU 935 CWT

[TippyCat]

I purchased a replacement dryer sensor probe, part #C00311914 when the old sensor broke apart - it is a single metal bar with a bent end that slides into a slot behind and underneath the lint basket inside the drum. Unfortunately I have no instructions or diagram for the machine or for changing out the sensor. Just sticking it into the slot and screwing it down does not solve the problem (cycle ends early and clothes are damp) and I suspect there is a cable or element (circuit board?) not visible under the drum that must be attached or threaded to the sensor. If there is one, may be damaged. Can someone point me to a diagram or video that shows the inside of the machine underneath the drum, or how this bar attaches underneath? Thanks for any assistance or advice. I am neither in my home country nor in the country of purchase, and this machine is about eight years old, so any help is much appreciated!

[Scottekarate]

Your part number looks the models serial number. It doesn't pop up on my distributer site. 

 

Edited April 15, 2021 by Scottekarate
Model # was in title

[Scottekarate]

Also, check your model number. 

[TippyCat]

Thanks for the response!  MYU935CWT is the model number on the front of the machine, but a google search shows the number 857522465002 in brackets next to it. This machine was made in France but purchased in Dubai.