Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

ISO Main Board Replacement Programming Literature

MarkWisdom

By MarkWisdom
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

MarkWisdom

MarkWisdom

Posted
Posted
Manufacturer: GE
Type of Appliance: Front Load Washer
Model Number: GFW650SPN
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

I have replaced the main board in a GE Front Load Washer. Full model number is GFW650SPN0SN, last bit is just color but felt like it should be represented as it is on the appliance. Anyway, plugged it in and need to program the bugger. I have downloaded and searched through a couple service manuals for proper method as what to do after replacing the board but have come up short. Any help would be greatly appreciated, thank you in advance!

Link to comment
Share on other sites
  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • MarkWisdom

    3

  • Son of Samurai

    1

Popular Days

Top Posters In This Topic

Popular Days

  • 2 weeks later...
MarkWisdom

MarkWisdom

Posted
  • Author
Posted

I believe I tried those and they did not have the info needed. I ended up finding the documents on GE's service site. I uploaded those documents for anyone else that ends up in a similar situation. Thank you very much though!

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...