Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool Model #WOS31ES0JS OVEN, Single Wall Thermal Fuse/Thermostat issue


Torch

Recommended Posts

We have this model wall mount Whirlpool oven in our guest house.  It's about 6 years old and very rarely been used.  About 6 months ago it quit working - as if the breaker was off.  I did some reading and thought it might be the thermal fuse.  I pulled the pulled the back panel of the oven and pulled off what I think is the thermal fuse and checked it for continuity and it was fine. It is a round puck, about 1" diameter with two connectors. After more reading it looks like there is also a thermal fuse near the control panel.  I located it and indeed it had failed (no continuity). It looks like a fuse of some sort with a clear vinyl cover on it.   I got a new one and put it in and it seemed to work find.  Then, after using it for 45 minutes or so at 400 it went off, as if there was no power.   I don't know if the auto clean feature was ever used but it certainly was not used since I replaced the thermal fuse near the control pane.

I have not taken it apart again but assume the thermal fuse I replaced again failed.   The obvious thought is that the oven is overheating and the thermal fuse is doing it job (good thing).  But why would it be overheating.  My thought would be a bad thermostat.  But, I am having a difficult time figuring out where the thermostat is located. I seem to find information that refers to the first Thermal Fuse I checked on the back of the oven that tested as good as a "thermal fuse" and as a "thermostat."  

I guess i have a few questions.  What causes the thermal fuse near the control panel to fail?  The temperature at that point getting too hot or elsewhere (like inside the oven)?   Where is the thermostat and might that be my problem?  Is it the puck shaped component near the back of the oven?  Or am I missing something here?

Any input would be greatly appreciated.

Thanks!

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • Torch

    3

  • Budget Appliance Repair

    2

Look for a possible cooling fan in the top control area to keep the electronics cool that isn't running - I didn't look up your model to see if it has one or not, that's just my first thought.

Link to comment
Share on other sites

I did not notice a cooling fan near the control panel and would have to pull it out to see.   Do most ovens have a cooling fan for the control area?   Is there two thermal fuses then - one on the back (probably to protect the oven area from overheating) and one around the control panel to keep that area from overheating?   

Link to comment
Share on other sites

Yes a thermal safety on the back wall of oven that can only be accessed by removing the oven and the control panel thermal fuse that blows if the control area gets too hot.

There is a cooling fan that sucks air from the vents at bottom of oven over the back of the oven where the thermal safety is and then exits out the vents above the door cooling the control area.

This oven is only about 3 or 4 years old but the cooling fan could have failed or be gummed up from dust and grease if used very heavy, the fan could be running slow not moving enough air or dead and moving no air.

You can see the blower fan REF#5 at the back of the control area when you have the console off looking at your thermal fuse but to access or change it you would have to remove the oven from the wall

image.thumb.png.b21b850100324899c0fe57a242cd5bd1.png

 

Link to comment
Share on other sites

Thanks very much for the above information Willie.   I won't have a chance to pull it our until after the holidays but will then and see what I can figure out.  I'm sure I will be back at tha time.

Again, I appreciate the information!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...