Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

RF27T55001SR/AA Samsung Hub Not working after replacing board and compressor


salini13

Recommended Posts

We have a Samsung hub and have dumped a lot of $$ into it.  We have had 2 service guys come.  One said to change the compressor…..we did that and still nothing.  The other said, change the board….we did that and still nothing.   Here is the problem we have.  We hear it try to kick on, but the it makes a humming noise and kicks on for about a second and then clicks and doesn’t do anything.  The diagnostic light blinks 3 times with a code of 83C on the hub panel.  We feel like there is a short on it somewhere, but we can’t find it.  Any ideas?  New board, new compressor and nothing.

Link to comment
Share on other sites

Error 83 -Compressor Abnormal current Detection Error Defect is displayed if abnormal current to the compressor is detected.

3 blinks

image.png.fc8373376cc9d159e1eeb0f0e67de7c2.png

Ohm out the compressor pin 1 to 2, 2 to 3, 3 to 1, they should all be equal. Then ohm all 3 pins to ground. Then check all the  wires in the harness from the inverter to the compressor. 

Too many zeros in the model should be RF27t5501SR/AA. The board you changed which board was it?

 

Edited by Vance R
removed extra picture.
  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...