Front water/ice dispenser just started being flaky. Pulled cover and verified all three connectors were seated and contact switch for cup lever is good. Fridge is three years old with serial number HH416305. Might be part of the muthaboard recall.
Looking to see if there are any diagnostics that I can run before doing battle with GE.
Thanks....
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Manual request for GE Profile PSC23SGRC SS
Started by jcryanjr, May 11 2009 03:39 PM
2 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
RegUS_PatOff
-
- Grand Master Funk
-
- 30,276 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 11 May 2009 - 04:05 PM
seems your serial number may not be covered, but others have had luck.
GE_Refrig_Board.pdf
give GE a call
this may be similar:
Pages from 31-9072 Arctica Pro SxS.pdf
GE_Refrig_Board.pdf
give GE a call
this may be similar:
Pages from 31-9072 Arctica Pro SxS.pdf
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
#3
jcryanjr
-
- Grasshopper
-
- 2 posts
Unsui
Posted 12 May 2009 - 02:19 PM
Domo on the very fast response for the diagnostic codes. I received a failure on 0-3, temperature control panel to dispenser board communication. Everything else passed.
I have sent GE an email regarding the extended warranty coverage. I'll keep my fingers crossed there and hope for success.
In the meantime, assuming GE treats me like a homebrew gone bad, should I look at replacing the dispenser board first, or the muthaboard to return full operation to the water/ice dispenser?
Many thanks.....
I have sent GE an email regarding the extended warranty coverage. I'll keep my fingers crossed there and hope for success.
In the meantime, assuming GE treats me like a homebrew gone bad, should I look at replacing the dispenser board first, or the muthaboard to return full operation to the water/ice dispenser?
Many thanks.....
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
