Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Monogram Fridge Z1S480NMA

delmarguy

By delmarguy
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

delmarguy

delmarguy

Posted
Posted

The first time this happened I took apart the freezer evaporator, got the evap pan most of the way off (not all the way - too scary). There was lots of ice, so I got all that out of there, put everything back together, and it was good for a year or so (maybe two years).

It happened again, so I did the same thing - but not much ice this time. Put it all back together, and it was fine for a week or so, now it's doing it again.

I'm wondering if it is something else? I'd like to verify the damper operation. My primitive manual says there are two dampers and a duct? I can see one damper, and I'm trying to find out where the others are - if I can find them, I can run the test to show they are opening and closing ok.

If it's the evaporator - probably a defrost problem - is that a part I can replace myself?

So if I had a good manual - describing the dampers & ducts - that would be great -

Thanks!

Link to comment
Share on other sites
  • 2 weeks later...
  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • applianceman18007260692

    3

  • delmarguy

    1

Popular Days

Top Posters In This Topic

Popular Days

applianceman18007260692 Sensei

applianceman18007260692

Posted
Posted
Page 6 shows the location of the evaporation thermister. Make sure that puppy is in its proper location and ain't wiggled out of position. Check all of them for proper specs as mentioned in the manual . That would be what I would do.
Link to comment
Share on other sites
applianceman18007260692 Sensei

applianceman18007260692

Posted
Posted

Let me know if my links are working so I can download them differently if you cannot access the manual.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...