Budget Appliance Repair Posted April 24, 2012 Share Posted April 24, 2012 I need a service manual on this Kenmore DehumidifierMod# 580.54351900Ser# 911TAQP00084Another model# that is the exact same but under the actual LG or maybe Comfort-Aire label is BHD-301-B looking up as a BHD-301 on the RepairClinic site shows it branded as Whirlpool.Need to know how to test the humidity sensor.Thanks. Link to comment Share on other sites More sharing options...
RegUS_PatOff Posted April 24, 2012 Share Posted April 24, 2012 I don't see a Humidity Sensor on the Kenmore 580.5435190I see a Thermistor ... Link to comment Share on other sites More sharing options...
Budget Appliance Repair Posted April 25, 2012 Author Share Posted April 25, 2012 (edited) RegUS, on RepairClinic they call it a "Thermistor", it does have a thermistor as part of the sensor but that is attached to the suction line so if it gets to cold from frost back the compressor will shut down and leave the fan blowing to keep it from freezing the evaporator.Appliance Parts Pros have a better/more complete picture of the complete sensor assembly with large pictures of each main part.6877A30013RPart number: AP4652359 Edited April 25, 2012 by Budget Appliance Repair Link to comment Share on other sites More sharing options...
Budget Appliance Repair Posted May 13, 2012 Author Share Posted May 13, 2012 Bumping this up to see if I can get any help????Anyone, a service manual on this or similar dehumidifiers?Thanks Link to comment Share on other sites More sharing options...
RegUS_PatOff Posted May 13, 2012 Share Posted May 13, 2012 similar to theLG GD40E / DH404E / DH400E / LD40E(but not much diagnostic info on that sensor)link PM'd 1 Link to comment Share on other sites More sharing options...
Budget Appliance Repair Posted May 14, 2012 Author Share Posted May 14, 2012 Thanks RegUS, better than what I had, (NOTHING).Only problem the manual only tells me things I already know, mainly how to take it apart, no diagnostic info for the sensor, (just as you said), and also nothing on the main PCB. Link to comment Share on other sites More sharing options...
Recommended Posts