Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 11 May 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers.
      As part of this workshop, we'll talk through a couple of case studies troubleshooting computer-controlled appliances. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, May 11 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore washer 417.44152400


Patricio

Recommended Posts

May I have a service manual for this Frigidaire made for Kenmore Front load washer.  Complaint is no spin.

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • Patricio

    2

  • Samurai Appliance Repair Man

    1

Top Posters In This Topic

  • Team Samurai

Thank you.  went & used a couple of manuals from previous posts that was not the same model number. an affinity manual & a 3 cu ft manual & a samurai video.  Unplug & door opens immediately.   Figured out fault code from blinking LED's again thanks to Samurai (4 door latch) 7 put into diagnostic mode everything good, pump moves water out.    Therefore it must be a defective door latch.    Not on my truck, part will be ordered.

Link to comment
Share on other sites


×
×
  • Create New...