Cityboysrus Posted March 30, 2014 Share Posted March 30, 2014 Washer fills but won't agitate or drain/spin. In spin mode the Timer sends 38 VAC to the lid switch. I need to confirm that my issue is with the Timer and not the Pressure Switch. I'd greatly appreciate the Service Manual for this Unit. Link to comment Share on other sites More sharing options...
Cityboysrus Posted March 31, 2014 Author Share Posted March 31, 2014 The Service Manual or Wiring Diagram would've made this quicker, but after following the gray wire from the Lid Switch to the Motor Switch I noticed a burn mark on the Female connector that connects to the motor switch. I cleaned the male terminal and removed all the wires from the quick connect and straight wired the motor wires. Another satisfied customer in the Land of Appliances. I would greatly appreciate the wiring diagram for my records. This was a good one!!! Link to comment Share on other sites More sharing options...
Team Samurai Samurai Appliance Repair Man Posted March 31, 2014 Team Samurai Share Posted March 31, 2014 Good find! The tech sheet for this one is the same as Whirlpool WTW5100VQ Washer Wiring Sheet Link to comment Share on other sites More sharing options...
Recommended Posts