Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    No upcoming events found

Window A/C fan switch


Castaway

Recommended Posts

I will be replacing the fan switch in an old 220 window unit.  I have on hand a fan switch from a relatively new 110 unit.  In comparing them, the only difference is the number of connections, the 220 has an econo mode.  Is there a problem or something special I need to know or can I put this one in and tape up the extra wire.  Can I post pics. somewhere or a link if I need some clarification?

Thanks,

Joanna, Gulf Shores, AL 

 

 

Link to comment
Share on other sites

  • Replies 11
  • Created
  • Last Reply

[user=4554]applianceman18007260692[/user] wrote:

I dont think I would try a 110 volt fan switch on a 220 unit
I agree, Most 110 volt a/c switches have a line and neutral on them where 220 volt a/c switches have 2 hot lines ie: 220 volts. i would also advise against trying this swap .
Link to comment
Share on other sites

Thanks, Guys!

Now my problem is the parts #.  I can't find/get to the model #.  All I know is that it's about 12-15 years old, it's 220, and the front plate has Whirlpool-DesignerStyle. 

There are 2 #'s on the backof the switch,  ASR8173-461 and 1158669.  It also has a GE logo.  Could you tell me which one of those?   Haven't found anyone locally handling parts for a window unit so I may not be able to compare.

The switch was working but the switch knob plastic stick thing broke.  Is there a way to fix that w/o replacing the whole part?  Superglue?

Thanks, again.

 

Link to comment
Share on other sites

The part# 1158669 is the correct part# to order.

Here it is: CLICK HERE to see and/or order.

Here's a parts break down of a unit like yours that uses the same part, (part ref# 26 is the selector switch).

CLICK HERE for a model like yours.

Link to comment
Share on other sites

More thanks to you Guys!

And Willie,  you gave this Senior a great confidence boost when you let me know the part #.  I've been concerned about ordering the wrong one and armed with the specific #, I'm gonna try calling around locally again.

Link to comment
Share on other sites

  • Team Samurai

Hey! Can you get more local than right on your computer screen? C'mon, don't be a web mooch: you get help here, buy the part here.

Link to comment
Share on other sites

I apologize. I was not thinking and I'm not very savvy when it comes to web manners regarding things like this.  The puchase from anywhere won't be made  until/unless I get the mold and mildew in it destroyed.

Sinecerely!

 

Link to comment
Share on other sites

you could use a dremmel and a small cutter wheel and make a slot in the shaft just big enough to get a small flat blade screwdriver in it . just for a getby

Link to comment
Share on other sites

Thanks.

I have a Dremel and cutting wheels but might need a thinner, smaller dia.  It's broken almost flush to the switch.  Can't use it as it is, sure will be worth the effort.

Peace.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...